If you are experiencing low range issues, you probably have some drift in the calibration of your battery meter. To correct this, fully charge the battery and then completely discharge the battery three times. The easiest way to discharge the battery is to flip the board over and tape the remote on full throttle. Run it down until the wheels no longer spin. This step is key. This should recalibrate the battery meter, and you’ll be back up to full range in no time!
Related Articles
-
Boosted Rev will turn on but not start/accelerate
- 0
- 71
-
Boosted Rev wont charge to 100%
- 2
- 592
- 1
-
How to Install Boosted Beams
- 0
- 385
- 1
-
Airline Travel with a Boosted
- 2
- 357
-
Technical specifications Boosted Rev and Boosted Rev Battery
- 1
- 675
-
Boosted Board Battery Lights Explained (XR battery error codes)
- 12
- 10891
- 10
Leave A Comment?