How to Calibrate your Nano-X for your Raptor 2

This process is simple, but needs to be done before each time you ride.

If you’ve ever experienced the throttle control on the Nano-X being too sensitive, or your wheels are spinning with no input from the remote, forgetting this step is most likely the reason why.

1. Turn on the Nano-X – MAKE SURE IT IS IN R-SPEC MODE (rear switch toggled DOWN)

2. Push throttle full-forward, full back then leave center

3. Turn on the skateboard

4. Wait for green light on Nano-X to become solid (indicates connection)

5. Check Acc/Brake function before riding

That’s it, you’re done! Now get out there and RIDE!

Was this article helpful?

Related Articles

Leave A Comment?