Analog Motion Handlebar basket Assembly Instruction

1
DSC02482A.jpg

Here is what you get from the box, a handlebar basket and a loom extender.

2
DSC02575.JPG

Remove your previous handlebar by removing the 4 front bolts. You will also need to remove every items that are on the handlebar. Fit your handlebar basket on the stem, then tighten the 4 front bolts.

DSC02583.JPG

3

Before you move onto any step further, make sure you install the loom extender, you can find theĀ instructions here.

4
DSC02593.JPG

You can then re-install every item on the handlebar.

DSC02627.JPG

Make sure you reconnect every cables properly.

5
DSC02657.JPG

That’s it! Your handlebar basket is ready to be used!

Was this article helpful?

Related Articles

Leave A Comment?