After fully charging your battery place it into the AM1 battery holder with the logo facing towards the top tube as shown.
You may need to slightly rotate the battery to ensure the pins align with the power ports on the base of the battery.
When the battery is in position it will look as shown.
To power up your AM1 press the red button on top of the battery. This will push down and stay in the ‘On’ position.
Pressing the other button on top of the battery will give you the current power level remaining. 4 green LEDs means your battery is fully charged and you’re ready to go!
When the power button is turned on, this will allow you to turn on your AM1 for the first time. Press and hold the power button on your AM1 display for a few seconds and your AM1 will power up. There is also a power reading on the display to keep an eye on how much battery powered assist you have remaining.