Carefully read the sections titled AM1 Battery charger safety and AM1 battery safety before using your AM1 charger.
To plug in the charger you will need the regional mains charger from your regionalisation pack. The example above shows a UK mains adapter plug.
Insert the mains plug into the main housing of the charger, and plug the mains plug into a correctly installed mains outlet that is suitable for the plug on the mains plug lead.
The charger has two LEDs on top of the body, that signify both power and the charging status. When you first plug in the charger the power LED will be red and the charge LED will be green.
Next open up the charger port on the top of the battery.
Insert the charger into the battery as shown.
The green LED will change to red when you plug in the battery. This shows that the battery is charging.
When the charge LED changes back to green the battery is fully charged and ready to plug into your AM1.
A full charge of your AM1 battery can take up to 6 hours. It will depend on a number of factors: the starting battery charge level, battery temperature and the ambient temperature where you are charing the battery.